Downloadable Resources

 
 
 
 
 
 
 

 
 
 
 

 
 
 

ICTD-9-4

 

DMC 3000TD

 

TWR Source

 
 
 

TelePoleTD

 

DMC 2000TD

 

Rad Tag

 
 
 

SCC Dongle

 

RDS-31TD

 

TWR Module

 
 

 

DMC 2000TD

2.8 - released 04-12-2019 - Download

Fixed

  • Fixed communication issue

2.7 - unreleased internal test build

2.6 - released 11-14-2017

Improvements

  • Added automatic shut off to the following scenario: If paired to Rad Tag and Connected to SCC. Disconnected from SCC then Rad Tag is powered off

2.5 - released 11-10-2017

Fixed

  • Fixed an issue where the proper dose rate was not being displayed if the current rate was less than the background level
  • Fixed an issue where the current dose rate was not being held when switching from automatic to manual mode

2.4 - unreleased internal test build

2.3 - released 5-13-2016

Improvements

  • Battery life improvements

Fixed

  • Fixed an issue related to configuration reads

2.2 - released 04-06-2016

Fixed

  • Fixed an issue with Chirp Rate

2.1 - released 04-01-2016

Fixed

  • Fixed an issue where the proper dose rate was not being sent through telemetry connector

2.0 - released 03-22-2016

New

  • Initial release

DMC 3000TD

2.0 - released 01-08-2021 - Download

Fixed

  • Fixed issue when in autonomous mode where backlight is not enabled but going from pause to active illuminates backlight anyway.
  • General bug fixes

1.9 - released 07-18-2019 - Download

Fixed

  • Fixed and issue with audible alarm when simultaneous dose and dose rate alarms were not properly alternating.
  • General bug fixes

1.8 - released 04-16-2019

Fixed

  • Communication Issue

1.7 - released 02-01-2018

Improvements

  • Preparation for mRem display of integers only

Fixed

  • General bug fixes

1.6 - unreleased internal test build

1.5 - released 01-17-2018

Fixed

  • Fixed an issue related to zeroing dose value when returning from paused in Autonomous Mode

1.4 - released 11-10-2017

Fixed

  • Fixed an issue related to background values

1.3 - released 10-19-2016

Fixed

  • Fixed an issue with Time Alarm and Time Remaining displays
  • Fixed an issue where Wearer ID was showing even when option was unselected in configuration

1.2 - released 10-05-2016

Fixed

  • Fixed an issue with Time Alarm

1.1 - released 10-05-2016

New

  • Initial release

ICTD 9-4

3.2 - released 04-12-2019 - Download

Fixed

  • Communication issue

3.1 - released 01-18-2018

Improvements

  • Stability improvements in interprocessor communications and preparation for TWR changes

Fixed

  • General bug fixes

3.0 - unreleased internal test build

2.9 - unreleased internal test build

2.8 - unreleased internal test build

2.7 - unreleased internal test build

2.6 - unreleased internal test build

2.5 - released 05-22-2017

Improvements

  • Eliminated the need to power cycling the instrument after eeprom write (Adding device to new Kit)

Fixed

  • Fixed an issue related to zeroing dose value when returning from paused in Autonomous Mode

2.4 - released 11-22-2016

Fixed

  • Fixed an issue with Beta Factor Response

2.3 - released 06-21-2016

Fixed

  • Fixed an issue related to TWR connection to TWR Sources

2.2 - released 05-26-2016

Fixed

  • Fixed and issue related to improper Zero Adjust behavior

2.1 - released 05-17-2016

Fixed

  • Fixed an issue related to Maximum Dose Rate

2.0 - released 05-11-2016

New

  • Initial release

Rad Tag

3.0 - released 04-12-2019 - Download

Improvements

  • Stability improvements in wireless communication

Fixed

  • General bug fixes

2.9 - released 02-01-2018

Improvements

  • Stability improvements in interprocessor communications and preparation for TWR changes

Fixed

  • General bug fixes

2.8 - released 01-18-2018

Improvements

  • TWR Improvements for larger kits

  • Increased battery low blink frequency to match TWR Source behavior

Fixed

  • General bug fixes

2.7 - unreleased internal test build

2.6 - unreleased internal test build

2.5 - unreleased internal test build

2.4 - unreleased internal test build

2.3 - unreleased internal test build

2.2 - released 05-22-2017

Improvements

  • Eliminated the need to power cycling the instrument after eeprom write (Adding device to new Kit)

  • Improved battery indicator performance when plugged in and operating

Fixed

  • General bug fixes

2.1 - unreleased internal test build

2.0 - unreleased internal test build

1.9 - released 07-07-2016

NEW

  • DMC 3000TD Compatibility

1.8 - released 06-21-2016

Improvements

  • TWR Improvements

Fixed

  • Fixed and issue related to improper Zero Adjust behavior

1.7 - released 05-11-2016

Fixed

  • Fixed an issue related to connecting to multiple TWR Sources

1.6 - released 04-06-2016

New

  • Initial release

RDS-31TD

5.7 - released 12-21-2019 - Download

Fixed

  • Fixed issue with WRM messages with GMP-25TD attached.

5.6 - released 07-18-2019

Fixed

  • Fixed issue with Chirp with GMP-25TD attached.

5.5 - released 04-12-2019

Improvements

  • Added GMP-25TD Capabilities

  • Increased accuracy of battery indication

Fixed

  • Fixed Chirp behaviour to more closely match standard RDS-31

  • General bug fixes and stability improvements

5.4 - unreleased internal test build

5.3 - unreleased internal test build

5.2 - unreleased internal test build

5.1 - unreleased internal test build

5.0 - unreleased internal test build

4.9 - unreleased internal test build

4.8 - unreleased internal test build

4.7 - unreleased internal test build

4.6 - unreleased internal test build

4.5 - unreleased internal test build

4.4 - unreleased internal test build

4.3 - unreleased internal test build

4.2 - unreleased internal test build

4.1 - unreleased internal test build

4.0 - unreleased internal test build

3.9 - unreleased internal test build

3.8 - unreleased internal test build

3.7 - unreleased internal test build

3.6 - unreleased internal test build

3.5 - unreleased internal test build

3.4 - unreleased internal test build

3.3 - unreleased internal test build

3.2 - unreleased internal test build

3.1 - unreleased internal test build

3.0 - unreleased internal test build

2.9 - unreleased internal test build

2.8 - released 03-29-2018

Fixed

  • Audio issue during simulated faults when Chirp is enabled

2.7 - released 03-28-2018

Fixed

  • Fixed WRM2 Data format to properly display on Teleview3000

  • Button beep while Chirp active fixed

  • Reduced WRM2 module startup time

  • Added external power supply checking to WRM2 data

  • Clear RTC time on firmware update

2.6 - unreleased internal test build

2.5 - unreleased internal test build

2.4 - unreleased internal test build

2.3 - unreleased internal test build

2.2 - released 02-01-2018

New

  • Initial release

SCC Dongle

3.8 - released 04-12-2019 - Download

New

  • GMP-25TD Compatibility

Improvements

  • Stability improvements

Fixed

  • General bug fixes

3.7 - unreleased internal test build

3.6 - unreleased internal test build

3.5 - unreleased internal test build

3.4 - released 01-15-2018

New

  • RDS-31TD Compatibility

Improvements

  • Communication stability improvements

Fixed

  • General bug fixes

3.3 - unreleased internal test build

3.2 - unreleased internal test build

3.1 - unreleased internal test build

3.0 - released 05-22-2017

New

  • TelePoleTD Compatibility

2.9 - released 09-16-2016

New

  • DMC 3000TD Compatibility

2.8 - released 03-23-2016

Improvements

  • Communication stability improvements

Fixed

  • Various bug fixes

2.7 - unreleased internal test build

2.6 - unreleased internal test build

2.5 - released 03-10-2016

New

  • Initial release

TelepoleTD

1.7 - released 04-12-2019 - Download

Fixed

  • Memory overflow fix

1.6 - released 02-01-2018

Improvements

  • Improved pulsing to better match standard TelePole

Fixed

  • Various bug fixes

1.5 - unreleased internal test build

1.4 - unreleased internal test build

1.3 - unreleased internal test build

1.2 - released 06-13-2017

1.1 - released 05-22-2017

New

  • Initial release

TWR Module Firmware

2.6 - released 08-01-2018 - Download

New

  • Increases maximum Kit size from 8 Sources and 8 Devices to 10 Sources and 16 Devices.

Improvements

  • Communication stability improvements
  • Communication speed increased between sources and devices to more closely match instrument response times.
  • Added more robust multi-kit abilities. I.E., operating multiple kits in close proximity.

Fixed

  • General bug fixes
  • Bootloader change: Some Windows machines don't automatically reenumerate the dfu device when it switches from COM to DFU. The firmware now forces a refresh by simulating a 'disconnect' from the connected machine.

2.5 - unreleased internal test build

2.4 - unreleased internal test build

2.1 - unreleased internal test build

2.0 - unreleased internal test build

1.9 - unreleased internal test build

1.8 - unreleased internal test build

1.7 - unreleased internal test build

1.6 - unreleased internal test build

1.5 - unreleased internal test build

1.4 - unreleased internal test build

1.3 - unreleased internal test build

1.2 - released 04-06-2016

New

  • Initial release

TWR Source

2.7 - released 04-12-2019 - Download

Improvements

  • Additional TWR Improvements for larger kits

Fixed

  • Various bug fixes

2.6 - unreleased internal test build

2.5 - unreleased internal test build

2.4 - unreleased internal test build

2.3 - released 06-29-2017

Improvements

  • TWR Improvements for larger kits

Fixed

  • Various bug fixes

2.2 - unreleased internal test build

2.1 - released 05-22-2017

Improvements

  • Eliminated the need to power cycling the instrument after eeprom write (Adding device to new Kit)

Fixed

  • Various bug fixes

2.0 - unreleased internal test build

1.9 - unreleased internal test build

1.8 - unreleased internal test build

1.7 - released 08-12-2016

New

  • Strength Adjustments while connected in addition to default adjustment

Fixed

  • Various bug fixes

1.6 - released 04-12-2016

Improvements

  • Communication stability improvements

1.5 - released 03-04-2016

New

  • Initial release